Pengaruh Jenis Larutan Pemasak Terhadap Kualitas Pulp Daun Pisang
Main Article Content
Abstract
The need for paper continues to increase, indicating that there is an alternative wood material that can be used as a base for making pulp. Materials that can be used are dried banana leaves which contain cellulose. The quality of the pulp can be obtained by the characteristics of the pulp produced. This study was conducted to determine the effect of the type of solvents on the pulp quality of banana leaves. The pulp has been made using delignification process with addition of 3% NaOH or 3% Na2CO3 3% and heating up to 120 minutes, at 105 °C. Pulp quality was obtained from the results of pulp analysis, cellulose content, water content, physical appearances and qualitative analysis by FTIR. From the analysis of cellulose content, water content and FTIR instruments, pulp made with 3% NaOH solution are better suited to 3% Na2CO3 where the resulting pulp has a water content of 4.96%, a smooth and fibrous texture, a rich color, and produces a cellulose hydroxyl absorption band that is stronger than the pulp made of 3% Na2CO3. However, the pulp made from 3% NaOH solution has a lower yield (56.5%) and cellulose content (26.07%) than Na2CO3 3%. Dried banana leaves can be used as an alternative in pulp making.
Keywords: pulp making; banana leaves; solvents
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright and Licensing
For all articles published in Fullerene Journal of Chemistry, Authors retain some copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. In addition, the article may be reused and quoted provided that the original published version is cited. These conditions allow for maximum use and exposure of the work while ensuring that the authors receive proper credit.
Authors are free to:
- Share— copy and redistribute the material in any medium or format
- Adapt— remix, transform, and build upon the material for any purpose, even commercially.
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices: You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.